• Re: FSX_HOMELAB?

    From Nigel Reed@21:2/101 to All on Thu Sep 19 14:40:34 2024
    On Thu, 19 Sep 2024 07:28:00 -0700
    "poindexter FORTRAN" (21:4/122)
    <poindexter.FORTRAN@f122.n4.z21.fidonet> wrote:

    k9zw wrote to poindexter FORTRAN <=-

    On 18 Sep 2024, poindexter FORTRAN said the following...

    Avon,

    We'd talked about having an echo for homelab/server/VM
    discussions, seems like there's a lot of people who could
    contribute. Would love to see something like that happen.

    I would enjoy this as well.

    Or, we could keep posting on FSX_GEN, let it get to critical mass and
    make the decision to split it off then. I bet that's how Avon would
    lean.

    I just don't want to bore people who aren't running enough hardware at
    home to run a small country. :)

    People can choose not to read it. I suspect most people don't run
    enough hardware to warrant a new group.
    --
    End Of The Line BBS - Plano, TX
    telnet endofthelinebbs.com 23
    --- SBBSecho 3.20-Linux
    * Origin: End Of The Line BBS - endofthelinebbs.com (21:2/101)
  • From Nigel Reed@21:2/101 to All on Thu Sep 19 14:42:16 2024
    On Wed, 18 Sep 2024 20:05:22 -0700
    "j0hnny a1pha" (21:4/158) <j0hnny.a1pha@f158.n4.z21.fidonet> wrote:

    I'd like an echo like this - but fsxNet is usually slow to add; and
    thats almost a good thing... we know what we have and new echoes
    sometimes get some traction for a minute and then are just dead
    weight.

    There's been some good conversations around Homelabs recently on
    fsxnet, but I wonder if a dedicated echo area is too niche, vs
    something like "Modern Computing" (vs Retro) that could capture that
    topic and more...

    So, you're basically saying any time there's good discussion about a
    topic then you should spin off a new group?


    People can't even post test messages in the test group. How do you
    think that's going to work out?
    --
    End Of The Line BBS - Plano, TX
    telnet endofthelinebbs.com 23
    --- SBBSecho 3.20-Linux
    * Origin: End Of The Line BBS - endofthelinebbs.com (21:2/101)
  • From Avon@21:1/101 to paulie420 on Mon Sep 23 11:15:18 2024
    On 18 Sep 2024 at 07:29p, paulie420 pondered and said...

    We'd talked about having an echo for homelab/server/VM discussions, seems like there's a lot of people who could contribute. Would love t see something like that happen.

    I'd like an echo like this - but fsxNet is usually slow to add; and thats almost a good thing... we know what we have and new echoes sometimes get some traction for a minute and then are just dead weight.

    I'd like it, but wonder if theres enough folks to make it active - we'll see what Avon thinks, but I love that fsxNet is solid and stable.

    I'm open to it, won't look at this until I get back from some planned travels. I think I should revisit the current echomail list just to see what may need trimming... but what I have also learned is that it's easy to add but hard to remove an echo once added as some systems keep sending posts to retired echos long after they have been pulled. Guess it all comes down to how the HUB software can handle such things.

    With HPT I think we negate it with write level access being set higher than normal node privileges allow for. I think ClrgHouz does the same - Deon?

    Anyway I digress. I'm not against an echo that's being requested over many months being created. I'm also never 100% sure if inactivity in some echos is necessarily a bad thing and should ensure an echo is retired. Some stuff if more niche it seems and ebbs and flows in popularity.

    I do think having echos with wider topic coverage is better than really niche so support the idea mooted by someone else (sorry can't recall who) that perhaps a modern computing echo vs the retro one may suffice?

    Poindexter - ping me again in 2-3 weeks time and we'll circle back to this and look to sort :)

    Kerr Avon [Blake's 7] 'I'm not expendable, I'm not stupid and I'm not going' avon[at]bbs.nz | bbs.nz | fsxnet.nz

    --- Mystic BBS v1.12 A48 (Linux/64)
    * Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (21:1/101)
  • From deon@21:2/116 to Avon on Mon Sep 23 10:16:12 2024
    Re: Re: FSX_HOMELAB?
    By: Avon to paulie420 on Mon Sep 23 2024 11:15 am

    Howdy,

    may need trimming... but what I have also learned is that it's easy to add but hard to remove an echo once added as some systems keep sending posts to retired echos long after they have been pulled. Guess it all comes down to how the HUB software can handle such things.

    With HPT I think we negate it with write level access being set higher than normal node privileges allow for. I think ClrgHouz does the same - Deon?

    So like HPT, I built in the idea of read and/or write access to an area. So can you can make some areas read-only and/or write-only.

    If you attempt to write to an area that is read-only (or you dont have permission to write because its an area that is writable by others,eg: "private" echoareas), then clrghouz will send you a netmail telling you that your post was not accepted and why (insufficent access).

    I've also been toying with the idea to have a voting system. It should be fairly easy for me to know if a node is active (messages being posted from that system), vs a system running on auto-pilot (only receiving messages) - and thus for a voting system, to be able to determine if the majority of active nodes agree to something.

    (I was going to implement a way to vote for a new, or retire an old echoarea - and automatically create it when the majority of active nodes agree to have it. Thought it might be something useful, and I was curious if, and how, I could make it work.)

    But, I've taken a break from clrghouz - I'm sorting through a gazillion photos and videos to find duplicates (programmatically) - I'm spending most of my time to find the tech specis of AVI and MOV files, as well as JPG and HEIC pictures, and then suck some relevant data out of them and figure out which ones are dupes :)


    ...лоеп
    --- SBBSecho 3.20-Linux
    * Origin: I'm playing with ANSI+videotex - wanna play too? (21:2/116)
  • From paulie420@21:2/150 to Avon on Sun Sep 22 18:04:27 2024
    I'm open to it, won't look at this until I get back from some planned travels. I think I should revisit the current echomail list just to see what may need trimming... but what I have also learned is that it's easy to add but hard to remove an echo once added as some systems keep
    sending posts to retired echos long after they have been pulled. Guess
    it all comes down to how the HUB software can handle such things.

    Nice - I'd be willing to help out any way(s) I can; I think the topic would either be in lots of users lives already, or spark learning the topic.

    I've created a fairly nice homelab and its really helped me learn lots more about Linux, networking and computing in general.

    I vote yes.



    |07p|15AULIE|1142|07o
    |08.........

    --- Mystic BBS v1.12 A48 (Linux/64)
    * Origin: 2o fOr beeRS bbs>>>20ForBeers.com:1337 (21:2/150)